Changes in diffusion tensor imaging (DTI) eigenvalues of skeletal muscle due to hybrid exercise training

Several studies have proposed the cell membrane as the main water diffusion restricting factor in the skeletal muscle cell. We sought to establish whether a particular form of exercise training (which is likely to affect only intracellular components) could affect water diffusion. The purpose of this study is to characterise prospectively the changes in diffusion tensor imaging (DTI) eigenvalues of thigh muscle resulting from hybrid training (HYBT) in patients with non-alcoholic fatty liver disease (NAFLD). Twenty-one NAFLD patients underwent HYBT for 30 minutes per day, twice a week for 6 months. Patients were scanned using DTI of the thigh pre- and post-HYBT. Fractional anisotropy (FA), apparent diffusion coefficient (ADC), the three eigenvalues lambda 1 (λ1), λ2, λ3, and the maximal cross sectional area (CSA) were measured in bilateral thigh muscles: knee flexors (biceps femoris (BF), semitendinosus (ST), semimembranous (SM)) and knee extensors (medial vastus (MV), intermediate vastus (IV), lateral vastus (LV), and rectus femoris (RF)), and compared pre- and post-HYBT by paired t-test. Muscle strength of extensors (P < 0.01), but not flexors, increased significantly post-HYBT. For FA, ADC and eigenvalues, the overall picture was of increase. Some (P < 0.05 in λ2 and P < 0.01 in λ1) eigenvalues of flexors and all (λ1-λ3) eigenvalues of extensors increased significantly (P < 0.01) post-HYBT. HYBT increased all 3 eigenvalues. We suggest this might be caused by enlargement of muscle intracellular space.     

Study of biocatalyst to produce ethanol from starch

This article presents a detailed study on the conditions for achieving a stable biocatalyst to be used in the production of ethanol from starch. Different pellets were used depending on which characteristic of the biocatalyst was being studied: (a) Saccharomyces cerevisiae entrapped in pectin or calcium alginate gel particles; (b) silica containing immobilized glucoamylase entrapped in pectin gel particles; or (c) pectin gel particles, with the silicaenzyme derivative and yeast coimmobilized. The influence of several variables on the mechanical resistance of the particle, on the viability of the microorganism, and on the rate of substrate hydrolysis was studied with biocatalyst. The best conditions found were 6% pectin gel, 2-mm particle diameter, and curein 0.2 M CaCl₂·2H₂O/60 mM acetate buffer, pH 4.2, for gel preparation; and 6.0 g/L of CaCl₂·2H₂O in the fermentation medium. Biocatalyst (c) was successfully tested for the production of ethanol from liquefield manioc flour syrup.     

Fabrication and optical reflection behavior of a two-dimensional barium titanate ceramic photonic crystal

We demonstrate a method for fabricating a two-dimensional hexagonal array of nanoscale barium titanate ceramic pillars. A precursor array was prepared by introducing a sol solution into an electron-beam resist mold with air holes and subsequently dry etching the unnecessary gel layer formed on the mold. A ceramic array, consisting of barium titanate ceramic pillars with a radius of 85 nm, a lattice constant of 450 nm, and a height of 500 nm, was fabricated by sintering the precursor array at 1073 K. The reflection spectra for the ceramic array in the visible range revealed the underlying photonic band gaps, which were in good agreement with results calculated using a plane-wave method. PACS 77.84.-s; 42.70.-a; 42.70.Qs     

What can we learn from hydrodynamic analysis at RHIC?

We can establish a new picture, the perfect fluid sQGP core and the dissipative hadronic corona, of the space-time evolution of produced matter in relativistic heavy-ion collisions at RHIC. It is also shown that the picture works well also in the forward rapidity region through an analysis based on a new class of the hydro-kinetic model and that this is a manifestation of the rapid increase of the entropy density in the vicinity of QCD critical temperature, namely, deconfinement.     

Cytotoxicity of asymmetric platinum complexes against L-1210 cells. Effect of bulky substituents

The asymmetric platinum complexes cis-Pt(LL')Cl2 (L = NH3, L' = CH3NH2, (CH3)2NH, C2H5NH2 and (C2H5)2NH and LL' = N,N-dimethylethylenediamine),--one of the NH3 groups of cis-Pt(NH3)2Cl2 was substituted by alkylamine--, were synthesized and their cytotoxic effects have been measured using L-1210 cells. The IC50 values of the asymmetric platinum complexes,--being obtained after 24 h exposure of L-1210 cells to the platinum complexes--, are almost comparable to the corresponding value of cis-Pt(NH3)2Cl2. In 2 h exposure, however, the IC50 values of the platinum complexes were dramatically changed, i.e., a marked difference was observed between those of L' = RNH2 and L' = R2NH. On the other hand, the amounts of platinum taken into the L-1210 cells is little affected by the alkylamino substitution. The results suggest that the bifunctional platinum binding to the target molecule may be responsible for the cytotoxicity.     

Nanoparticles in Emissions and Atmospheric Environment: Now and Future

Journal of Nanoparticle Research -     

Analysis of one-and two-particle spectra at RHIC based on a hydrodynamical model

We calculate the one-particle hadronic spectra and correlation functions of pions based on a hydrodynamical model. Parameters in the model are so chosen that the one-particle spectra reproduce experimental results of √s= 130 AGeV Au + Au collisions at RHIC. Based on the numerical solution, we discuss the space-time evolution of the fluid. Two-pion correlation functions are also discussed. Our numerical solution suggests the formation of the quark-gluon plasma with large volume and low net baryon density.     

Elementary reaction analysis of the radical polymerization of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups

The polymerizations of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups (RS‐EMBI and S‐EMBI) with dimethyl 2,2′‐azobisisobutyrate (MAIB) were studied in methanol (MeOH) and in benzene kinetically and with electron spin resonance (ESR) spectroscopy. The initial polymerization rate (R_p) at 60 °C was given by R_p = k[MAIB]^{0.58 ± 0.05}[RS‐EMBI]^{2.4 ± 0.l} and R_p = k[MAIB]^{0.61 ± 0.05}[S‐EMBI]^{2.3 ± 0.l} in MeOH and R_p = k[MAIB]^{0.54 ± 0.05}[RS‐EMBI]^{1.7 ± 0.l} in benzene. The rate constants of initiation (k_df), propagation (k_p), and termination (k_t) as elementary reactions were estimated by ESR, where k_d is the rate constant of MAIB decomposition and f is the initiator efficiency. The k_p values of RS‐EMBI (0.50–1.27 L/mol s) and S‐EMBI (0.42–1.32 L/mol s) in MeOH increased with increasing monomer concentrations, whereas the k_t values (0.20?7.78 × 10⁵ L/mol s for RS‐EMBI and 0.18?6.27 × 10⁵ L/mol s for S‐EMBI) decreased with increasing monomer concentrations. Such relations of R_p with k_p and k_t were responsible for the unusually high dependence of R_p on the monomer concentration. The activation energies of the elementary reactions were also determined from the values of k_df, k_p, and k_t at different temperatures. R_p and k_p of RS‐EMBI and S‐EMBI in benzene were considerably higher than those in MeOH. R_p of RS‐EMBI was somewhat higher than that of S‐EMBI in both MeOH and benzene. Such effects of the kinds of solvents and monomers on R_p were explicable in terms of the different monomer associations, as analyzed by ¹H NMR. The copolymerization of RS‐EMBI with styrene was examined at 60 °C in benzene. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1819–1830, 2003     

Determination of lead in seawater by flow-injection on-line preconcentration-electrothermal atomic absorption spectrometry after coprecipitation with iron(III) hydroxide.

A flow-injection on-line preconcentration-electrothermal atomic absorption spectrometric (ETAAS) method coupled with a coprecipitation method has been developed for the determination of lead in seawater. The combination of two preconcentration procedures, coprecipitation with iron(II) hydroxide and solid-phase extraction with a lead-selective resin, Pb-Spec, allowed the determination of lead at the ng kg(-1) level. Lead in 250 g of a sample solution was collected by coprecipitation with 10 mg of iron. The precipitate was dissolved in 25 ml of 1 mol l(-1) nitric acid; then, a 4-ml aliquot of the sample solution was introduced into the flow-injection system to preconcentrate and separate lead from iron on a Pb.Spec microcolumn. The sorbed lead was eluted with a 1.0 x 10(-4) mol l(-1) EDTA solution. The 30-microl portion of the eluate corresponding to the highest analyte concentration zone was injected into a graphite furnace. The overall enhancement factor was about 200 for 250 g of the sample. The average and standard deviation of ten blank values obtained were 1.7 ng and 0.38 ng, respectively. The recovery was 93.7 +/- 5.0% for seawater spiked with 20 ng kg(-1) lead. The proposed method is applicable to the analysis of seawater for lead at slightly higher levels.